If you are unable to set the access point to this mode, we recommend wireless setup using a USB cable temporarily. Refer to the instructions that came with your access point. Set your access point to Automatic Wireless (one-push) mode and click Next. Hold down the WPS button on your label machine. Choose No, I do not have a USB cable and then click Next.ī. If this configuration consistently fails, we recommend that you manually configure the wireless settings on your machine.Ī. If the connection failed then cycle the power on the router for about 15 seconds and then retry the wireless setup again. įor Advanced Users: If you want to manually enter the IP address settings on your machine, click Change IP Address and enter the necessary IP address settings for your network. The settings will be sent to the machine. On the Wireless Network Settings Confirmation screen, click Next. Enter the Network Key and then click Next.Į. You may need to cycle the power to the router for about 15 seconds to reestablish communication and then click Refresh. If the list is blank, check that the router is turned on, broadcasting the network name, and that it's within range for wireless communication. The list of available wireless networks is displayed, choose your network name and then click Next. If the Important Notice window appears, confirm your SSID and Network Key, place a check next to Checked and confirmed and then click Next. Choose Yes, I have a USB cable to use for installation and then click Next.ī.
Follow the instructions depending if you have a USB cable or not:Ī. If you are using a firewall other than the Windows Firewall or the Windows Firewall is turned off, then click OK when you receive the firewall warning screen.ġ4. Choose Change the Firewall port settings to enable network connection and continue with the installation. Choose Brother Peer-to-Peer Network Printer and click Next.ġ3. Choose Wireless Network Connection and click Next.ġ2.
The software and manuals will be downloaded and installed.ġ1. If you agree to the terms of the “End-User License Agreement”, click Agree.Ĩ. If prompted to enter the serial number, type your label machine serial number and click Submit.ħ. Printer Driver must be selected to setup the machine wirelessly on the network. The needed Software and Manuals will be automatically check marked for install: Printer Driver, P-touch Editor, etc. Enter your Name and Company Name (if applicable).ĥ. Select your Printer from the list, select your Language from the list, and click OK. Follow these instructions using a USB cable.Ĭ. If you are unable to set the access point to this mode when prompted during the installation, we recommend wireless setup using a USB cable temporarily. You will need to know how to put your wireless access point into Automatic Wireless (one-push) mode.
0 kommentar(er)
